|
|
|
|
|
|
| MXL 2001
|
"This
mic is fabulous! My DJ's were not originally happy about using the
MXL 2001 over a dynamic after bad experiences with more expensive
condensers, but now they love it. I would put these up against mics
costing 4 times the amount. The 2001's are used in Studio C almost
every day where many acts have used them including Tori Amos, Sting,
Susan Tedeschi and Warren Zevon."
Dana Puopolo, Chief Engineer
KACD/KBCD / Channel 103.1 World-Class Rock
Los Angeles, CA
"Marshall condenser mics are great at any price. Both in the
studio and live they capture the nuances of my playing. I'll be using
them in the studio on my solo album." Steve Negus
Drummer: Saga
"Because of the low price point, I finally have a high quality,
superb sounding mic I can use in more demanding situations, like toms
and guitar amps, without trashing an expensive tube mic."
Richard Dashut
Producer: Fleetwood Mac, Lindsey Buckingham
|
- 25mm (1”) Large Capsule Condenser
- Gold-sputtered, 6 micron, low distortion
diaphragm
- FET preamp with balanced transformer
output
- Durable heavy duty brass enclosure
- Supplied with screw-on mic stand
adapter
- Optional high isolation shock mount
available
The MXL 2001 altered the conception of large diaphragm
condenser microphones. Finally, an affordable, good sounding condenser
is available for the performing musician or home studio. Commercial
studios have also benefited from MXL's innovation. They are now
using the MXL 2001 in very demanding applications, without
the fear of ruining an expensive, classic condenser mic. Its 1"
gold-sputtered diaphragm has been specially designed to stay out
in front of the mix making it perfect for vocal recording, drum
kit and guitar cabinet miking, as well as general room miking. The
MXL2001 has a high quality FET preamp and its output is transformer
balanced. A screw-on stand adapter is included and a high isolation
shock mount (MXL-56) is available as an option.
|
|
Type:
|
Condenser pressure gradient
mic with large 25mm diaphragm capsule |
|
Frequency Range:
|
30Hz-20kHz |
|
Polar Pattern:
|
Cardioid |
|
Sensitivity:
|
15mV/Pa |
|
Impedance:
|
200W |
|
S/N Ratio:
|
80dB (Ref. 1Pa A-weighted)
|
|
Equivalent Noise Level:
|
18dB(A weighted IEC
268-4) |
|
Max SPL for 0.5% THD:
|
130dB |
|
Power Requirements:
|
Phantom Power 48V ±4V |
|
Current Consumption:
|
<3.0mA |
|
Size:
|
50mm × 190mm |
|
Weight:
|
470g |
|
Metal Finish:
|
Black |
|
|
|

|
|
|
|